The SmartFiller
Automated mixing of coolant and topping up of coolant sumps
The SmartFiller
The Liquidtool SmartFiller is part of the Liquidtool AutoPilot solutions. It is mounted on top of a coolant drum or IBC and connected to a water supply.
The SmartFiller automatically mixes the optimal coolant concentration and then tops up each connected coolant sump individually with the correct amount.
The SmartFiller also measures the level in the drum or IBC, notifying you when the concentrate container needs to be replaced.
Characteristics
Installation
Installation is quick and easy.
The Liquidtool SmartFiller can be magnetically mounted on top of a coolant drum or an IBC. Connecting all hoses and tubes is straightforward.
A water source, a working internet connection, and a power socket are all you need.
Fully automized coolant management
No more manual mixing
The SmartFiller automatically mixes the correct coolant concentration. It then tops up every machine with the respective top up rate.
The times of manual mixing coolant and topping up a sump are finally over.
The SmartFiller is mixing coolant using volumetric dosing. Your output concentration remains stable in contrast to mixing with the Venturi principle.
Drum level measurement
Know when to change the drum
The SmartFiller measures the filling level in the drum or IBC automatically. The differential pressure sensor regularly measures the level of coolant concentrate. You can always see the measurement data in the Liquidtool Manager
You will be notified automatically if the level is close to its defined minimum. Therefore, you will have enough time to prepare the replacement of the drum or IBC.
Drum change
Quick and easy
The changeover of a coolant concentrate container is very straightforward if the drum or IBC needs to be replaced. Just take the 2 hoses out of the drum and put them into the new one.
The SmartFiller can also be mounted on top of the new drum thanks to its magnets.
Scope of delivery
- 1 SmartFiller device
- 2 Hoses (1x 12mm concentrate inlet, 1x 6mm level sensing)
- 1 Hose fixation
- 1 Power supply
- 4 Adapter plugs
- 1 Hose connection set
Specification
Weight
Net: 5.5 kg (12.13lbs)
Gross: 8.1 kg (17.86lbs)
Size (W x H x D)
180 x 503 x 95mm
19.8 x 7.09 x 3.74 inch
Power supply
100-240V 50/60Hz
Digital Ports
RJ45, Bluetooth, WLAN
Water inlet
G3/4″
Concentrate inlet
Hose barb 13mm (1/2″)
Emulsion outlet
Hose barb 16mm (5/8″)
Concentrate level measurement
6mm (1/4″)
Concentrate level measurement
Differential pressure sensor
Mixing volume
800 liter/hour
211 gal/hour
Mixing concentrations
0.1 – 16%
Input pressure
3 – 6 bar
45 – 85 psi
Max. length of piping to machine
50 m (165ft.)
IP enclosure rating
IP44
Fixation
Magnetic
Operation conditions
5 to 40 °C (41 to 131 °F); 0 to 95 % relative Humidity
Storage temperature
-25 to 60 °C (-4 to 140 °F) (dry)
Download Data sheet
Download the full data sheet of the Liquidtool SmartFiller. Submit your contact details and an e-mail with your copy will be sent to you.
*By submitting this form, you agree to the Liquidtool Website and Services User Agreement and take notice of the Liquidtool privacy policy.
